Submitted by sudo in freeAsInFreedom

I have a few ideas for some free software projects. The easiest one I want to make is a clone of the old "3D maze" screensaver for Windows 95, but with updated graphics, and all references to Windows replaced with Linux. Since Xscreensaver seems to be the most popular screensaver daemon, I'll make it for that. Before I start, though, I want to know if anyone would actually want to use this as their screensaver. Would you use this if I made it?

10

Comments

You must log in or register to comment.

josefStallman wrote

I don't think anything will make me switch of the BSOD screensaver, but I think it's a cool idea!

5

alqm wrote (edited )

I like my Matrix screensaver too much to let go (: keeps track of agents - i mean, fascists.

3

zer0crash wrote

If you made a vaporwave 3d maze clone that would be fucking lit af.

3

egg wrote

i don't mean this in a mean way, but I, just me personally, i hate that fucking penguin. Plan 9's mascot is so much better.

2

elyersio wrote

How do i make a bad dog screensaver?

1

sudo OP wrote

Here's the source code for XScreenSaver. Here's the file for how to write new screensavers for XScreenSaver:


==========================================================================

                     Writing new XScreenSaver modules

==========================================================================

Any program that can be made to render on an X window created by another
process can be used as a screen saver.  Just get the window ID out of
$XSCREENSAVER_WINDOW, draw on that, and you're done.

In theory, you can write a screen saver in any language you like.  In
practice, however, languages other than C or C++ tend not to allow you to
draw to windows that they did not create themselves.  Unfortunately, this
means that if you want to write a screen saver, you must write it in C.

Given that you're going to be writing in C, you might as well take
advantage of the various utility functions that I have written to make
that easier.  Writing a new screen saver in C using the frameworks
included with xscreensaver simplifies things enormously.

Generally, the best way to learn how to do something is to find a similar
program, and play around with it until you understand it.  Another
approach is to not worry about understanding it, but to just hack it out.
Either way, your best bet is probably to start with one of the existing
xscreensaver demos, included in the "hacks/" directory, rename the file,
and edit it until it does what you want.

The "Greynetic" and "Deluxe" hacks are probably good ones to start with,
since they are so very simple.  For OpenGL programs, "DangerBall" is a
good example.


==========================================================================
Requirements for inclusion with the XScreenSaver collection
==========================================================================

  If you come up with anything, send it to me!  If it's good, I'd love to
  include it in the xscreensaver distribution.  However, there are a few
  requirements for me to distribute it:

  - Write in portable ANSI C.  No C++.  No nonstandard libraries.

  - Write a .man page describing all command-line options.

  - Write an .xml file describing the graphical configuration dialog box.

  - Include a BSD-like copyright/license notice at the top of each source
    file (preferably, just use the one from "screenhack.h", and include
    your name and the current year).  The GNU GPL is not compatible with
    the rest of XScreenSaver.


==========================================================================
The XScreenSaver API
==========================================================================

  - Start with #include "screenhack.h"

  - Define 2 global variables:

      yoursavername_defaults -- Default values for the resources you use.
      yoursavername_options  -- The command-line options you accept.

  - Define 5 functions:

      yoursavername_init     -- Return an object holding your global state.
      yoursavername_draw     -- Draw a single frame, quickly.
      yoursavername_free     -- Free everything you've allocated.
      yoursavername_reshape  -- Called when the window is resized.
      yoursavername_event    -- Called when a keyboard or mouse event happens.

      The "event" function will only be called when running in a window
      (not as a screen saver).  The "reshape" event will be called when the
      window size changes, or (as a screen saver) when the display size
      changes as a result of a RANDR event (e.g., plugging in a new monitor).

      It's ok for both the "event" and "resize" functions to do nothing.

  - All other functions should be static.

  - The last line of the file should be 
    XSCREENSAVER_MODULE ("YourSaverName", yoursavername)

  - Finally, edit the Makefile to add a rule for your program.
    Just cut-and-paste one of the existing rules.

  Your "draw" must not run for more than a fraction of a second without
  returning.  This means "don't call usleep()".  Everything has to be a
  state machine.

  You may not store global state in global variables, or in function-local
  static variables.  All of your runtime state must be encapsulted in the
  "state" object created by your "init" function.  If you use global or
  static variables, your screen saver will not work properly on MacOS.

  Do not call XSync() or XFlush().  If you think you need to do that, it
  probably means that you are you are relying on the speed of the graphics
  card for timing, which probably means that your "draw" function is
  taking too long.


==========================================================================
The XLockMore API
==========================================================================

  Some of the display modes that come with xscreensaver were ported from
  XLock, and so, for historical reasons, they follow a slightly different
  programming convention.  For newly-written Xlib programs, you'd be
  better off following the pattern used in hacks like "Deluxe" than in
  hacks like "Flag".  The XLockMore ones are the ones that begin with
  "#ifdef STANDALONE" and #include "xlockmore.h".

  But, all OpenGL screen savers have to follow the XLockMore API.

  The XLockMore API is similar to the XScreenSaver API, in that you define
  (roughly) the same set of functions, but the naming conventions are
  slightly different.  Instead of "hackname_init", it's "init_hackname",
  and it should be preceeded with the pseudo-declaration ENTRYPOINT.

  One annoying mis-feature of the XLockMore API is that it *requires* you
  to make use of global variables for two things: first, for each of your
  command line options; and second, for an array that holds your global
  state objects.  These are the only exceptions to the "never use global
  variables" rule.


==========================================================================
Programming Tips
==========================================================================  

  - Your screen saver should look reasonable at 20-30 frames per second.
    That is, do not assume that your "draw" function will be called more
    than 20 times a second.  Even if you return a smaller requested delay
    than that, you might not get it.  Likewise, if your "draw" function
    takes longer than 1/20th of a second to run, your screen saver may be
    consuming too much CPU.

  - Don't make assumptions about the depth of the display, or whether it
    is colormapped.  You must allocate all your colors explicitly: do not
    assume you can construct an RGB value and use that as a pixel value
    directly.  In particular, you can't make assumptions about whether
    pixels are RGB, RGBA, ARGB, ABGR, or even whether they are 32, 24,
    16 or 8 bits.  Use the utility routines provided by "utils/colors.h"
    to simplify color allocation.

  - It is better to eliminate flicker by double-buffering to a Pixmap
    than by erasing and re-drawing objects.  Do not use drawing tricks
    involving XOR.

  - If you use double-buffering, have a resource to turn it off. (MacOS,
    iOS and Android have double-buffering built in, so you'd end up
    triple-buffering.)

  - Understand the differences between Pixmaps and XImages, and keep in
    mind which operations are happening in client memory and which are in
    server memory, and which cause latency due to server round-trips.
    Sometimes using the Shared Memory extension can be helpful, but
    probably not as often as you might think.

  - On modern machines, OpenGL will always run faster than Xlib.  It's
    also more portable.  Consider writing in OpenGL whenever possible.


==========================================================================
MacOS, iOS and Android
==========================================================================

  Though XScreenSaver started its life as an X11 program, it also now runs
  on MacOS, iOS and Android, due to a maniacal collection of compatibility
  shims.  If you do your development on an X11 system, and follow the
  usual XScreenSaver APIs, you shouldn't need to do anything special for
  it to also work on MacOS and on phones.

  See the READMEs in the OSX/ and android/ directories for instructions on
  compiling for those platforms.

==========================================================================

3

closed wrote

I personally don't see any point in screensavers, and dislike that screensaver concept in particular.

1